Soporte de pared autoadhesivo para regleta de enchufes
$29.99
- Descripción
- Información adicional
- Reseñas (18)
Descripción
DO YOU WANT TO ORGANIZE YOUR POWER STRIPS EASILY?
Soporte de pared autoadhesivo para regleta de enchufes is a smart, drill-free solution to solve problems of tangling cables & messy gadgets cluttering around by fixing them on the wall!
CARACTERÍSTICAS :
✅Multipurpose: Fixed Power Strip.Remote control.Paper towel boxes, Routers, adapters, etc. You need fixed items. It can be installed in the kitchen, bathroom, office, bedroom wall. It can work on Smooth ceramic tile, mirror, flat stainless steel, acrylic, plastic, laminate base, and more. Attention -THIS WALL HOOKS DONT WORK WELL ON PAINT WALLS. MIGHT DAMAGE THE PAINT.
✅Power Strip Fixer: Specially designed for power strip, WiFi Router, paper towel boxes, adapters, and remote control, merely installing your power strip and say goodbye to mess.
Simple and Fast Installation: Punch-free mounted, self-adhesive acrylic transparent adhesive, paste without residue, strong load-bearing, the longer the bonding time, the stronger the adhesion, the maximum load is up to 5kg.
✅Separable and Reusable: The chute design is convenient for you to fix and separate. The reusable acrylic gel allows you to clean multiple times while still maintaining the initial adhesion.
✅Compatibility: Power strip mount holder for AmazonBasics, Belkin, GE Power Strip, TESSAN, Bototek, Prime Wire & Cable, and most other mountable power strips.
Modo de empleo:
1. Wiping the wall then tear off the acrylic glue.
2. Cleaning the wall then stick the holder on the wall. (Press holder to remove bubble of adhesive.)
3. Removing the secondary buckle then paste on the power strip.
4. Inserting the power strip on the wall.
Nota:
1. Before using, please clean the wall and power strips well and press the holder
2. Please press the holder to remove the bubble of adhesive, this will help to stick the holder in the wall better.
3. Please don’t get the adhesive into the water or its stickiness may be weakened then it’s very hard to stick again.
4. If you want to remove the holder, please heating the adhesive up to soften it by using a blow dryer or heat gun, you can remove the holder without leaving residue in this way.
5. We advise not to stick on the lime wall, or the stickiness will be weak then the holder may drop out from the lime wall in a short time.
Especificaciones:
Material: PÁGINAS
Tamaño:10*4*1CM
Tipo: Power Strip Fixator
Color: As the picture show
Peso:0.04kg
El paquete incluye:
1x Power Strip Fixator
Información adicional
| Color | 1, 2 |
|---|---|
| Marca | Ninguno |
| Tipo | Soportes y bastidores de almacenamiento |
| Installation Type | Tipo montado en la pared |
| Applicable Space | Cocina |
| Utilice | Power Strip Fixator |
| Tamaño | METRO |
| Clasificación | Non-folding Rack |
| Material | PÁGINAS |
| Número de modelo | Power Strip Fixator |
| Característica | abastecido |
| No. of Tiers | Single |
18 opiniones para Self-Adhesive Power Strip Wall Mount
Añade una reseña
Debes estar logueado en para publicar una opinión.
Spanish 
English 
German 
French 
Arabic 
Japanese 
Malayalam 
Portuguese 
Italian 
Korean 
Dutch 
Polish 
Persian 
Swedish 
Norwegian 
Packed in a normal package without a pup. The packaging of the goods itself because of this wrinkled.
In action have not tried yet. How to paste add feedback